User Tools

Site Tools


rml_divers

Uniview: make custom view visible

  • select view 'Uni'
  • press <Navi-Enter>

Caps Lock

  • toggle by pressing <Cursor On/Off>

Load a single reference

  • Switch off the Railmonitor
  • Plug the CF-Card with the reference to be loaded in the folder “RMLV0” into the Railmonitor
  • Switch on the Railmonitor
  • Press <Menu> and select “Load Ref” with pressing <Navi-Enter> or <Yes/Edit>
  • select the desired reference with the <Navigation> knob and press <Navi-Enter> or <Yes/Edit>
  • The reference get loaded
  • repeat this step for all wished references

System reset

Under certain circumstances, respectively with certain misconduct of the device, a system reset is requested. If a system reset is carried out, all references and the loaded session stored are going to be lost. The settings will survive.

  • Turn the device off
  • Press and hold <F1>
  • Turn the device on
  • Confirm the reset message by pressing <Yes/Edit>
  • Enter the company name again
  • The device is ready for operation again

Date and Time

Normally you would not need to adjust the Date or Time. Please inform your sales agent/reseller in case you would do, since this would mean that the backup battery is discharged.

Adjust Date

  • Press <Menu> and select “Settings..” by pressing <Navi-Enter> or <Yes/Edit>
  • Select “System” by pressing <Navi-Enter> or <Yes/Edit>
  • Select “Date” by pressing <Navi-Enter> or <Yes/Edit>
  • Enter “0” for password and by press <Yes/Edit>
  • Enter year as four digit number
  • Enter month as number 1 to 12
  • Enter day as number 1 to 31
  • Press <Yes/Edit> to save the entered date

Adjust Time

  • Press <Menu> and select “Settings..” by pressing <Navi-Enter> or <Yes/Edit>
  • Select “System” by pressing <Navi-Enter> or <Yes/Edit>
  • Select “Time” by pressing <Navi-Enter> or <Yes/Edit>
  • Enter “0” for password and by press <Yes/Edit>
  • Enter hour as number 0 to 23
  • Enter minute as number 0 to 59
  • Enter second as number 0 to 59
  • Press <Yes/Edit> to save the entered time

DB Finishing

After certification at DB, the following steps are necessary for the finishing:

  • Switch off the Railmonitor
  • Press and hold <F1>,<F2> and <F3> while switching on the Railmonitor
  • Select “System” and press <Navi-Enter> or <Yes/Edit>
  • Enter code “3” and press <Yes/Edit>
  • set GenCSV to the specific customer value (per default “0”)
  • Press <Yes/Edit>
  • Answer the question “Save Settings?” with pressing <Yes/Edit>
  • Switch off the Railmonitor
  • Switch on the Railmonitor
rml_divers.txt · Last modified: 2017/11/07 22:26 (external edit)